KubeVirt L2 Integration

This example demonstrates how to connect KubeVirt virtual machines to an L2 EVPN/VXLAN overlay using OpenPERouter, extending the Layer 2 integration example.

Overview #

The setup creates both Layer 2 and Layer 3 VNIs, with OpenPERouter automatically creating a Linux bridge on the host. Two KubeVirt virtual machines are connected to this bridge via Multus secondary interfaces of type bridge.

Architecture #

L3VNI (VNI 100): Provides routing capabilities and connects to external networks
L2VNI (VNI 110): Creates a Layer 2 domain for VM-to-VM communication
Linux Bridge: Automatically created by OpenPERouter for VM connectivity
VM Connectivity: VMs connect to the bridge using Multus network attachments

KubeVirt L2 Integration

Example Setup #

Note: Some operating systems have their inotify.max_user_intances set too low to support larger kind clusters. This leads to:
virt-handler failing with CrashLoopBackOff, logging panic: Failed to create an inotify watcher
nodemarker failing with CrashLoopBackOff, logging too many open files
If that happens in your setup, you may want to increase the limit with:
sysctl -w fs.inotify.max_user_instances=1024

The full example can be found in the project repository and can be deployed by running:

make docker-build demo-kubevirt

The example configures both an L2 VNI and an L3 VNI. The L2 VNI belongs to the L3 VNI’s routing domain. VMs are connected into a single L2 overlay. Additionally, the VMs are able to reach the broader L3 domain, and are reachable from the broader L3 domain.

Configuration #

1. OpenPERouter Resources #

Create the L3VNI and L2VNI resources:

apiVersion: openpe.openperouter.github.io/v1alpha1
kind: L3VNI
metadata:
  name: red
  namespace: openperouter-system
spec:
  vrf: red
  vni: 100
  hostsession:
    asn: 64514
    hostasn: 64515
    localcidr:
      ipv4: 192.169.10.0/24
---
apiVersion: openpe.openperouter.github.io/v1alpha1
kind: L2VNI
metadata:
  name: layer2
  namespace: openperouter-system
spec:
  hostmaster:
    autocreate: true
    type: bridge
  l2gatewayip: 192.170.1.1/24
  vni: 110
  vrf: red
  vxlanport: 4789

Key Configuration Points:

The L2VNI references the L3VNI via the vrf: red field, enabling routed traffic
hostmaster.autocreate: true creates a br-hs-110 bridge on the host
l2gatewayip defines the gateway IP for the VM subnet

2. Network Attachment Definition #

Create a Multus network attachment definition for the bridge:

apiVersion: k8s.cni.cncf.io/v1
kind: NetworkAttachmentDefinition
metadata:
  name: evpn
spec:
  config: |
    {
      "cniVersion": "0.3.1",
      "name": "evpn",
      "type": "bridge",
      "bridge": "br-hs-110",
      "macspoofchk": false,
      "disableContainerInterface": true
    }

3. Virtual Machine Configuration #

Create two virtual machines with network connectivity:

apiVersion: kubevirt.io/v1
kind: VirtualMachine
metadata:
  name: vm-1
spec:
  runStrategy: Always
  template:
    metadata:
      labels:
        kubevirt.io/vm: vm-1
    spec:
      domain:
        devices:
          interfaces:
          - bridge: {}
            name: evpn
          disks:
          - disk:
              bus: virtio
            name: containerdisk
          - disk:
              bus: virtio
            name: cloudinitdisk
        resources:
          requests:
            memory: 2048M
        machine:
          type: ""
      networks:
      - name: evpn
        multus:
          networkName: evpn
      terminationGracePeriodSeconds: 0
      volumes:
      - containerDisk:
          image: quay.io/kubevirt/fedora-with-test-tooling-container-disk:v1.1.0
        name: containerdisk
      - cloudInitNoCloud:
          networkData: |
            version: 2
            ethernets:
              eth0:
                addresses:
                - 192.170.1.3/24
                gateway4: 192.170.1.1
        name: cloudinitdisk

VM Configuration Details:

Uses the evpn network attachment for bridge connectivity
Cloud-init configures the VM’s IP address and default gateway
Second VM is using IP 192.170.1.4/24 and name vm-2

Validation #

VM-to-VM Connectivity #

Test connectivity between the two VMs:

# Connect to VM console
virtctl console vm-1

# It may take about 2 minutes to start up and get to the login.
# Once it does, login with username "fedora" an password "fedora".

# Test ping to the other VM
ping 192.170.1.4

Expected output:

PING 192.170.1.4 (192.170.1.4): 56 data bytes
64 bytes from 192.170.1.4: seq=0 ttl=64 time=0.470 ms
64 bytes from 192.170.1.4: seq=1 ttl=64 time=0.321 ms

Packet Flow Verification #

Monitor packet flow on the router to verify traffic:

# Check packets flowing through the bridge
tcpdump -i br-hs-110 -n

Expected packet flow:

13:56:16.151606 pe-110 P   IP 192.170.1.3 > 192.170.1.4: ICMP echo request
13:56:16.151610 vni110 Out IP 192.170.1.3 > 192.170.1.4: ICMP echo request
13:56:16.152073 vni110 P   IP 192.170.1.4 > 192.170.1.3: ICMP echo reply
13:56:16.152075 pe-110 Out IP 192.170.1.4 > 192.170.1.3: ICMP echo reply

VM-to-External L3 Connectivity #

With 192.168.20.2 being the IP of the host on the red network:

# Run this from the VM console
curl 192.168.20.2:8090/clientip

Expected output:

192.170.1.3:37144

The pod is able to reach a host on the layer 3 network and the IP is preserved.

When monitoring traffic:

18:01:50.406263 pe-110 P   IP 192.170.1.3 > 192.168.20.2: ICMP echo request, id 21760, seq 0, length 64
18:01:50.406267 br-pe-110 In  IP 192.170.1.3 > 192.168.20.2: ICMP echo request, id 21760, seq 0, length 64
18:01:50.406284 br-pe-100 Out IP 192.170.1.3 > 192.168.20.2: ICMP echo request, id 21760, seq 0, length 64
18:01:50.406287 vni100 Out IP 192.170.1.3 > 192.168.20.2: ICMP echo request, id 21760, seq 0, length 64
18:01:50.406295 toswitch Out IP 100.65.0.0.39370 > 100.64.0.1.4789: VXLAN, flags [I] (0x08), vni 100
IP 192.170.1.3 > 192.168.20.2: ICMP echo request, id 21760, seq 0, length 64

Traffic Flow Analysis: We see that the packet comes from the veth interface towards the bridge associated with VNI 110 (the default gateway), then is routed to the bridge corresponding to the layer 3 domain and finally encapsulated.

Live Migration Testing #

Verify that connectivity persists during live migration:

# Start continuous ping from one VM to another
ping 192.170.1.4

# In another terminal, initiate live migration
virtctl migrate vm-2

The ping should continue working throughout the migration process.

Troubleshooting #

Common Issues #

Bridge not created: Verify the L2VNI has hostmaster.autocreate: true
VM cannot reach gateway: Check that the VM’s IP is in the same subnet as l2gatewayip
No VM-to-VM connectivity: Ensure both VMs are connected to the same bridge (br-hs-110)

Debug Commands #

# Check bridge creation
ip link show br-hs-110

# Verify network attachment
kubectl get network-attachment-definitions

# Check VM network interfaces
virtctl console vm-1
ip addr show